Ready mixed solar fluid in easy to handle 10l glycol containers. These are ideally suited to servicing or commissioning thermal high pressure heating systems. The tyfocor type ready mixed fluids make the commissioning of any system simple and quick, as there is no need for testing to make sure the fluids are within workable tolerance.
If the solar heating fluids are too week then the fluids will boil inside the pipe work and subsequently in winter the solar fluids will not perform well in lower temperatures.
Simply drain your existing fluid into a suitable container and replace with this ready mixed Tyfocor thermal heating fluid.
Glycol fluids contain contaminants that should only be handled using suitable work wear. Therefore it is very important to dispose of glycol fluids in a safe and proper manner.
Parts in this solar heating group:
Solar tube connectors DN12 | Solar tube connectors DN16 | Solar tube brackets | Solar fluid | Solar flexible tube connection set | Solar C clips | Solar fiber washers | Solar pump station connectors | Solar tube lead slate | Pressure relief valve | DZR compression tube straight connector | DZR compression elbow connector | Compression tube insert DN12 or DN16 | DZR compression tube to fiber washer flat face connector | DN16 x 22mm male adaptor | Temperature sensor cable outside | Temperature sensor cable inside | Immersion heater switch